你好。
Hello.

在本教程中，我们将学习一些比较指令。
In this tutorial, we will learn some compare instruction.

我们学习了之前的教程比较指令，我们只是在 S1 和 S2 大于或小于我们的相等之前确定。
We learned previous tutorial comparing instruction, and we just look to determine before the and S1 and S2 is bigger than or less than our equality.

但现在我们将创建一个区域，我们有最少的蛋白质，我们有最多的女王，我们有竞争数据。
But now we will create one zone and we have the minimum protein and we have the maximum queen and we have the competition data.

是在这个范围之间还是在这个范围之外或者是上侧还是下侧？
Is it between this range or out of this range or upper side or lower side?

据此，我们将得到类似 600 或 601 的输出。
And according to that, we will get an output like 600 or 601.

我将在这里插入第二行。
I will insert a line two here.

好的。
OK.

还有一个。
And one more.

好的，现在让我们从一千开始吧。
OK, now let's start right out the thousand.

我现在就要使用，我不会在这里提出任何条件。
I'm going to use now, I'm not going to put any condition to here.

只要赢得正确的区域即可。
Just win it right zone.

比较。
Compare.

这是我的指令用法，然后我需要一个区域。
This is my instruction usage and then I need an area.

数据区，比如一百三一百零二，那么这是一个D。
The data area, for example, the one hundred thirty one hundred and two, then this is one D.

100.

100.

这是一张，102 是一张凳子。
This is one and the 102 is a stool.

所以我们拥有的就是我的牧场。
So what we have this is my the ranch.

这是我的地盘，好吗？
This is my area, OK?

根据日期，我们将比较 104。
According to date, we will compare the 104.

只是我们忘记了一件事。
Just we forgot one thing.

610.

610.

这是我的辅助。
This is my auxiliary.

并根据日期。
And according to date.

就在这里，上午有一百个。
This right here and hundred out am.

六百一十一。
Six hundred and eleven.

但我犯了一个错误，好吧，因为连续610、11和12是设计比较使用的。
But I did a mistake, OK, because continuously 610, 11 and 12 is used by design compare.

因此，我会写下你的名字615 L.D.
Because of this, I will write your name 615 L.D.

611 出和 616 和 L.D.
611 out and 616 and L.D.

一百十二老617。
hundred twelve and old 617.

好的，我准备好显示比较指令的两半正在运行或工作。
OK, I'm ready to show two halves on compare instruction is running or working.

我们将其发送给保单，然后再稍等一下。
Let's send it to the policy, and let's wait a little bit more again.

让我们看看，有变化吗？
And let's see, is it change?

是运行还是不运行？
Is it running or not?

我们所做的事情几乎完成并完成了。
What we did almost finished and done.

是的，它将完成，我将关闭它。
Yes, and it will be completed and I will close it.

然后我们只需要进入监视器模式和这个监视器。
Then we just need to go to monitor mode and this monitor.

突然，您会看到611被激活。
Suddenly, you will see 611 is activated.

那么条件是什么呢？
So what is the condition?

如果是104，则S3小于S1和S2。
If the 104 this is the S3 is less than S1 and S2.

因此，如果 S3 等于或介于 100 和 12 之间，则这是有效的。
So this is an active if S3 is equal to or between 100 and 12.

这些医生都是游骑兵，等于一百一十二名。
These are all these doctors are rangers and equal to the one hundred and twelve.

如果我说的是 104，我很抱歉 100 或 102 或 100 和 D 102 之间。
I'm sorry the 100 or the 102 or between 100 and D 102, if I'm talking about the 104.

所以这是活跃的和如果。
So this is active and if.

一个故事大于De 102，这意味着将有六百一十二个活跃的故事。
A story is greater than De 102, that means six hundred twelve will be active.

这样，女儿听到的任何输入都会倾斜，例如，D 100 必须使其成为 5。
So that skew a daughter any input to hear, for example, D 100 must make it five.

这是我最低的一个。
This is my the lowest one.

你和我去DD一百零二，然后我给你写，比如50。
You and I will go to DD one hundred and two, then I will write you, for example, 50.

这是我的最大音量，现在我们可以更改 104 数据。
This is my maximum volume and now we can change the 104 data.

好的？
OK?

据此，d 104 不为零。
According to that, no d 104 is zero.

因此，它不在范围内。
Because of that, it is not in the range.

还有就是，呃，这个值 d 104 值小于 100。
And also it is the, uh, this value d 104 value is less than the 100.

我的最低要求是，当您看到 M 610 节拍处于活动状态时。
My minimum, while you saw M 610 beat is active.

现在，如果我做 5 d 104，你会看到 11。
Now, if I make five d one hundred and four, you will see 11.

好吧，如果我们在二十五这样的范围内，好吧，如果您达到范围的最大值，仍然是 611，那么仍然是 611。
OK, if if we are in the range like twenty five, OK, still m six hundred eleven if you are reaching to maximum value of the range still m 611.

但如果我更改为五十一，则意味着它大于我的最大限值，我将设置它，以便六百一十二处于活动状态。
But if I change to fifty one, that means it's greater than my maximum limit value and I will set it so m six hundred and twelve is active.

因此，您可以做什么，您可以根据您的设定值、最大值和最小值监控任何数据，例如模拟输入或传感器输入或脉冲程序中的任何数据。
So what you can do, you can monitor any data like your analog input or the sensor input or any data into your pulse program, according to your set value, a maximum and minimum value.

这是您的范围，任何范围都可以在这里使用，因为您可以从该区域获得涉及的数据（例如这三个不同的数据或三个不同的联系人）等输出，这取决于您的项目。
This is your range and any range can be useful usable in here because it is up to your project that you can get the output like involved data like these three different data or three different contact from the zone.

比较类似的比较指令，您可以轻松地将其用于您的 PC 项目。
Compare like compared instruction and you can use it easily into your PC project.

本教程到这里就结束了，再见，变成另外两个你了。
For this tutorial finished here, see you into an extra two you.